Zero-touch Enrollment (ZTE) is an enrollment method offered by Google for the selected devices. Upon first boot or factory reset, ZTE forces Android devices to enroll in Esper. Follow the steps below to onboard a device using ZTE. Learn more about ZTE enrollment.
As of December 2025, we now support Android 14 and 15 ZTE provisioning.
Information regarding Zero-touch Enrollment
- You will need to manually factory reset the device to enroll it in ZTE and Esper.
- This is an alternative method for enrolling devices to the console. You may need to sign up and log in to Android Partners to begin.
- If you experience issues during ZTE provisioning, you may need to log into the portal and accept ZTE's updated Terms of Service.
- If the device camera activates during the provisioning process, this may mean the device is not registered with Esper. Ensure that the device’s registration information is correct and try again.
Step 1: In the Esper console, go to Provisioning Methods. Then select the following:
- Device Platform: Android (required)
- Provisioning method: Google Zero-touch Enrollment (required)
- Provisioning Blueprint (required)
- Provisioning Group (optional)
- Provisioning Wi-Fi (optional)
- Provisioning Language (optional)
Step 2: Copy the JSON data.
After entering the device information (individually or in bulk), a JSON script will be generated.
Then copy the JSON data or download the config file.
Step 3: Navigate and log in to the Zero-touch Enrollment (ZTE) portal. You will be taken to the Configuration tab.
Here you'll create a configuration to associate with a device.
Step 4: Click the ‘+’ symbol to add a new configuration.
Step 5: On the pop-up, enter the details — configuration name and EMM DPC (Esper Device Management). Enter your organization’s information for the company name, support email address, and support phone number.
Paste JSON data you copied from the console into the DPC extras field.
Step 6: The added configuration will be displayed on the Configuration tab.
Step 7: Now, you need to add the configuration to the device. Navigate to the device tab. Here all the devices added by the reseller are displayed with no configuration.
Step 8: Select the device you want to associate with a configuration. Click on the dropdown and choose the configuration.
Step 9: Confirm your choice and the device will be associated with the configuration.
Step 10: Factory reset the device.
You will go through the standard Android setup steps once the device boots up again. The Zero-touch Portal will find your device and start the onboarding process after a few license/onboarding prompts. Additionally, the device will be provisioned with Esper.
Tips
Note: You can assign the same configuration to multiple devices at a time. Navigate to the Device section for bulk upload and choose ‘Upload batch configurations’ from the menu.
Download an example from the pop-up, associate a configuration, and upload a CSV file.